あなたの watercooling と modding 販売代理店 あなたの watercooling と modding 販売代理店

Aquacomputer aquainlet PRO 150 ml, G1/4

  • 45361
  • 34064
  • 4260073417051
  • 0,627 Kg

3 出荷の準備ができて、納期1-3日

4,576.00¥ *

価格 incl. VAT 送料" href="https://www.aquatuning.jp/shipping-fee" style="text-decoration:underline">送料

The reservoirs aquainlet PRO and aquainlet XT are designed to be directly mounted onto an...さらに
製品情報
The reservoirs aquainlet PRO and aquainlet XT are designed to be directly mounted onto an aquastream XT or Eheim 1046 pump. The design is perfectly matched to the pump, after installation pump and reservoir form a virtually seamless unit. In particular, the mounting rails of the pump are extended into the reservoir, which for the first time allows for the mounting plate to be installed beneath the center of gravity. This is especially helpful when using rubber decouplers or a shoggy sandwich. When installed onto the suction port of the pump, an o-ring seals the connection between pump and reservoir and two latches secure the reservoir to the pump housing, preventing accidental release of the bayonet coupling between pump cover and pump housing. Two connection threads for the return line located at the front and the side of the unit allow for flexible installation options and are paticularly useful if the reservoir is to be installed with limited space.

The reservoirs aquainlet PRO and aquainlet XT are closely related to the aqualis series and are also equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aquainlet reservoirs are made from Delrin and connected by a stainless steel rod.

The aquainlet XT variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors.

All variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube.

Technical details:
Dimensions without pump: approx. 56 x 67 x 198 mm
Filling volume: approx. 150 ml
Connection threads: G1/4

Compatible to the following pumps:
- aquastream XT
- Eheim 1046 and pumps identical in construction

Scope of delivery:
One Reservoir
Three sealing screws G1/4 (preinstalled)

Please note:
Fittings and pump are not included in delivery, please order seperately.
Awards and documents
技術的な詳細とビデオ… さらに
技術的な詳細
色: 黒色
メーカー: Aquacomputer
付属ポンプ: いいえ
コネクター: G1 /4"インナースレッド
接続可能数: 3
フィルポート: G1 /4"インナースレッド
LED マウント用穴: 利用不可
素材: Borosilikatglas
リザーバー・タイプ: タワータンク
ボリューム: 150ml
ポンプの互換性: Eheim 1046/48用
寸法: 56 x 67 x 198mm
ビデオ
Questions & Answers more
Questions & Answers
2 他の言語の質問。
この質問を表示するには、ここをクリックしてください。
Question from Guest #93698 from 10. October 2018
Sehr geehrte Damen und Herren, in der Produktbeschreibung zum "aquainlet PRO 150 ml, G1/4 " (Ausgleichsbehälter) führen Sie aus, das die Röhre aus Borosilikatglas sei. Hingegen wird bei den techn. Details als Material Plexiglas ausgewiesen. Was die Produktbeschaffenheit angeht, ist das aber ein großer Qualitätsunterschied! Können Sie mich erhellen? Mit freundlichen Grüßen Frank Manthey
Antwort von Aquatuning GmbH vom 11. November 2018
Es hadelt sich in der Tat um Boroslikatglas. Der Fehler wird ausgebessert, vielen Dank für den Hinweis.
Question from Guest #93698 from 10. October 2018
eine weitere Frage: dieser "Aquacomputer aquainlet PRO 150 ml, G1/4 "-Ausgleichsbehälter ist doch sicher auch kompatibel zur "Innovatek HPPS Plus - 12V Pumpe"? Vielen Dank
Antwort von Aquatuning GmbH vom 10. October 2018
Ja, das ist laut Aquacomputer ohne Probleme möglich
評価 0
閲覧、書き込み、レビューに関するディスカッションさらに
レビュー
5 星:
(0)
4 星:
(0)
3 星:
(0)
2 星:
(0)
1 星:
(0)
Aquacomputer Double Protect Ultra 1000ml Aquacomputer Double Protect Ultra 1000ml
コンテンツ 1000 ml
851.50¥ *
Aquacomputer Double Protect Ultra – blue 1000ml Aquacomputer Double Protect Ultra – blue 1000ml
コンテンツ 1000 ml
851.50¥ *
Arctic thermal compound MX-4 Tube 4g 2019 Arctic thermal compound MX-4 Tube 4g 2019
コンテンツ 4 g (133,575.00¥ * / 1000 g)
534.30¥ *
Innovatek Protect concentrate by Aquatuning 1000ml Innovatek Protect concentrate by Aquatuning 1000ml
コンテンツ 1000 ml
2,184.00¥ *
Aquacomputer Double Protect Ultra – red 1000ml Aquacomputer Double Protect Ultra – red 1000ml
コンテンツ 1000 ml
851.50¥ *
Hose cutter Hose cutter
653.90¥ *