- 記事番号.: 1016525
- メーカー番号: SCKTT-2000TUF
- EAN: 4571225057071
- 重量: 1,004 Kg
> 25 出荷の準備ができて、納期1-3日
Kotetsu Mark II TUF Gaming Alliance
In cooperation with Asus Scythe presents the TUF Gaming Alliance version of the Kotetsu Mark II CPU Cooler. Design elements, such as a topplate with the TUF logo and the familiar pattern, as well as a 120mm RGB LED Kaze Flex fan with matching yellow decouplers connect the cooler optically with the rest of the TUF Gaming Alliance components. Four nickel-plated heatpipes complete the overall picture and convey an attractive and high-quality appearance. The heat sink features compact dimensions and is designed for maximum compatibility. An overall height of only 154 mm, the asymmetrical design of the heat sink for maximum memory and graphics card compatibility as well as an optimised and user-friendly mounting system form a convincing overall concept for installation in almost any standard housing.
H.P.M.S. III (Hyper Precision Mounting System III)
The Kotetsu Mark II uses a revised version of the secure and user-friendly Hyper Precision Mounting System. A pre-assembled mount bar makes installation much easier, while spring-loaded screws provide balanced contact pressure. Combined with the redesigned backplate and rubber/plastic spacers, the system offers an easy and convenient installation process and compatibility with all current sockets including AMD®'s AM4 and Intel®'s LGA 2066 platforms.
Kaze Flex 120 RGB PWM Fan
The Kotestu Mark II TUF uses a PWM fan from the award-winning Kaze Flex series to guarantee smooth running and an average service life of 120,000 hours. The self-contained Sealed Precision FDB reduces friction and wear to a minimum thanks to a special oil film. Rubberized bearing surfaces have a decoupling effect and prevent the transmission of vibrations to the heat sink. Eight RGB LEDs arranged in a ring around the fan motor illuminate the translucent fan blades.
Asymmetrical design and low overall height
To ensure maximum compatibility, the Kotetsu Mark II TUF heat sink is not centered directly above the base plate, but slightly offset to the rear and side. This asymmetrical design allows unrestricted use of the complete memory banks and leaves enough space for large-format GPU coolers. With its compact height of only 154 mm, the Kotetsu Mark II fits easily into all standard PC cases.
- Kotetsu Mark II TUF Gaming Alliance CPU Cooler
- Socket LGA775
- Socket LGA1150
- Socket LGA1151
- Socket LGA1155
- Socket LGA1156
- Socket LGA1366
- Socket LGA2066
- Socket LGA2011 / 2011-v3 (Square ILM)
- Socket AM2
- Socket AM2+
- Socket AM3
- Socket AM3+
- Socket AM4
- Socket FM1
- Socket FM2
- Socket FM2+
Please note that for mounting on motherboards with AMD® sockets, a screwed original backplate of the motherboard is required. Please check before purchase if this is screwed! If this is fastened with plastic pins, a mounting of this cooler is not possible.
- 136 x 154 x 85 mm with fan (additional dimensions)
- 645 g (with fan)
- Mounting material for Intel & AMD sockets, 120mm RGB LED fan, thermal paste, fan terminals, installation instructions.
Material of the base plate:
- nickel-plated copper base 38 x 38 mm (more info)
- Model name: Kaze Flex 120 RGB PWM
- Fan dimensions:120 x 120 x 27 mm
- Noise level: 4.0 ~ 24.9 dBA
- Air flow rate: 16.6 ~ 51.17 CFM
- Fan speed: 300 upm (±200) ~ 1200 upm (±10%)
- Voltage / current:DC 12V / 0,13A
- Static pressure:0.75 ~ 10.3 Pa / 0.076 ~ 1.5 mmH²O
- Storage type:Sealed Precision FDB